Sony STR-DG2100 Operating Instructions - Page 45
To cancel the measurement, want to measure.
View all Sony STR-DG2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Getting Started 2 Press V/v repeatedly to select "Settings," then press or b. The Settings menu list appears on the TV screen. 3 Press V/v repeatedly to select "Auto Calibration," then press or b. 4 Press V/v repeatedly to select "Quick Setup," then press . 5 Press V/v repeatedly and to un-check the items you do not want to measure. • Speaker Distance • Speaker Level • Frequency Characteristic 9 Measurement starts. The measurement process will take approximately 30 seconds with a test tone. Wait until the measurement process completes. 6 Press b. 7 Press to select "Start." 8 The measurement starts in five seconds. Note You cannot measure the speaker height of the surround speakers and the surround back speakers. Set the position of the surround speakers from "Position" in the Speaker settings menu. Tips • Operations other than turning the receiver on or off are deactivated during the measurement. • When connecting special speakers, such as dipole speakers, the measurements have not been performed correctly or auto calibration cannot be performed. To cancel the measurement The measurement is cancelled when you change the volume, switch functions, change the setting of the SPEAKERS switch, or connect headphones. 45GB