Sony STR-K670P Operating Instructions (HT-DDW670) - Page 32

Other Operations Naming preset stations and inputs You can enter a name of up to 8 characters for preset stations and inputs selected with input buttons, and display it in the receiver's display. 1 To index a preset station Press FM or AM to select the FM or AM band, then tune in the preset station you want to create an index name for (page 21). To index an input Press the input button to select the input you want to create an index name for. 2 Press MAIN MENU repeatedly to select " CUSTOM ". 3 Press or repeatedly to select "NAME IN". 4 Press ENTER. The cursor flashes and you can select a character. 5 Use or and + or - to create an index name. Press + or - repeatedly to select a character, then press > to move the cursor to the next position. Tips • You can select the character type as follows by pressing + or - repeatedly. Alphabet (upper case) t Numbers t Symbols • To enter a blank space, press + or - repeatedly until a blank space appears in the display. • If you made a mistake, press < or > repeatedly until the character you want to change flashes, then press + or - repeatedly to select the correct character. 6 Press ENTER to store the index name. Note (Models of area code CEL, CEK only) When you name an RDS station and tune in the station, the Program Service name appears instead of the name you entered. (You cannot change the name of a Program Service name. The name you entered will be overwritten by the Program Service name.) 32GB Using the Sleep Timer You can set the receiver to turn off automatically at a specified time. Use the remote for the operation. Press SLEEP while the power is on. Each time you press SLEEP, the display changes cyclically as follows: 2-00-00 t 1-30-00 t 1-00-00 t 0-30-00 t OFF While using Sleep Timer, "SLEEP" lights up in the display. Tip To check the remaining time before the receiver turns off, press SLEEP. The remaining time appears in the display. If you press SLEEP again, the sleep timer will be canceled.