Sony STR-K700 Operating Instructions - Page 6
About, indicators, display
View all Sony STR-K700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
About the indicators on the display 1 4 15 LFE L C R SL SR 14 SLEEP roTTCOAX 113 MEMORY D.RANGEI STEREO MON 10 191 ••• Name 1 SW 2 LFE 3 SP 4 DODIGITAL 5 DO PRO LOGIC (II) Function Lights up when audio signal is output from the SUB WOOFER jack. Lights up when the disc being played back contains an LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. Lights up when the receiver is turned on. This indicator does not light up if a headphone is connected to the PHONES jack Lights up when Dolby Digital signals are input. Note When playing a Dolby Digital format disc, be sure that you have made digital connections and that INPUT MODE is not set to "ANALOG" (page 47). "00 PRO LOGIC" lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. "DO PRO LOGIC II" lights up when the Pro Logic II Movie/Music decoder is activated. Note Dolby Pro Logic and Dolby Pro Logic II decoding do not function for DTS format signals. • Name DTS 171 MEMORY 8 Preset station indicators 9 Tuner indicators 10 D.RANGE COAX 1121OPT 13 SLEEP Function Lights up when DTS signals are input. Note When playing a DTS format disc, be sure that you have made digital connections and that INPUT MODE is not set to "ANALOG" (page 47). Lights up when a memory function, such as Name Input, Preset Memory (page 45), etc., is activated. Lights up when using the receiver to tune in radio stations you have preset. For details on presetting radio stations, see page 44. Lights up when using the receiver to tune in radio stations (page 43), etc. Lights up when dynamic range compression is activated (page 29). Lights up when INPUT MODE is set to "AUTO" and the source signal is a digital signal being input through the COAXIAL jack, or when INPUT MODE is set to "COAX IN" (page 47). Lights up when INPUT MODE is set to "AUTO" and the source signal is a digital signal being input through the OPTICAL jack, or when INPUT MODE is set to "OPT IN" (page 47). Lights up when the Sleep Timer function is activated (page 48). sus