Sony STR-K850P Operating Instructions - Page 46
Specifications - watts
View all Sony STR-K850P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 8 ohm loads, both channels driven, from 40 - 20,000 Hz; rated 110 watts per channel minimum RMS power, with no more than 0.7 % total harmonic distortion from 250 milliwatts to rated output (Models of area code U only). Amplifier section POWER OUTPUT Models of area code U, CA Rated Power Output at Stereo Mode (8 ohms 40 Hz - 20 kHz, THD 0.7 %) STR-K850P: 110 W + 110 W Reference Power Output (8 ohms 1 kHz, THD 0.7 %) STR-K850P: FRONT1):120 W/ch CENTER1): 120 W SURR1): 120 W/ch 1) Depending on the sound field settings and the source, there may be no sound output. Frequency response MULTI CH IN, CD/SACD, MD/TAPE, DVD, VIDEO 1, 2 10 Hz - 70 kHz +0.5/-2 dB (with sound field and tone bypassed) Inputs (Analog) MULTI CH IN, CD/SACD, MD/TAPE, DVD, VIDEO 1, 2 Sensitivity: 500 mV Impedance: 50 kilohms S/N2): 96 dB (A, 500 mV3)) 2) INPUT SHORT (with sound field and tone bypassed). 3) Weighted network, input level. Inputs (Digital) DVD (Coaxial) VIDEO 2, CD/SACD, MD/TAPE (Optical) Sensitivity: - Impedance: 75 ohms S/N: 100 dB (A, 20 kHz LPF) Sensitivity: - Impedance: - S/N: 100 dB (A, 20 kHz LPF) Outputs MD/TAPE (OUT), VIDEO 1 (AUDIO OUT) SUB WOOFER Voltage: 500 mV Impedance: 10 kilohms Voltage: 2 V Impedance: 1 kilohms Outputs (Digital) MD/TAPE (Optical) Sensitivity: - Tone Gain levels: ±6 dB, 1 dB step FM tuner section Tuning range 87.5 - 108.0 MHz Antenna terminals 75 ohms, unbalanced Intermediate Frequency 10.7 MHz Sensitivity Mono: Stereo: 18.3 dBf, 2.2 µV/75 ohms 38.3 dBf, 22.5 µV/75 ohms Usable sensitivity 11.2 dBf, 1 µV/75 ohms S/N Mono: Stereo: 76 dB 70 dB Harmonic distortion at 1 kHz Mono: 0.3% Stereo: 0.5% Separation 45 dB at 1 kHz Frequency response 30 Hz - 15 kHz, +0.5/-2 dB Selectivity 60 dB at 400 kHz 46US