Sony STR-V555ES Operating Instructions - Page 27

qf MULTI CHANNEL DECODING indicator This indicator lights when the unit is decoding signals recorded in a multi channel format. qg 2ND AV button Press repeatedly to select 2 channel (stereo) audio and video signals for output to a stereo amplifier in another room (page 11). Each press selects another audio and video source (except PHONO) to be output from the 2ND AV jacks. "SOURCE" selects the same program source as the main function controls. • Even if 2ND AV is set to "SOURCE", the sound from front speakers (L/R) is not output when the receiver is set to 5.1CH INPUT. • Only signals from components connected to the analog inputs are output through the 2ND AV OUT jacks. No signals are output from components connected to only the digital inputs. • When you use AUDIO SPLIT to assign a digital audio input (for example, DVD OPTICAL) to the main function and set 2ND AV to "SOURCE", the analog audio signals of the assigned audio (for example, analog audio input of DVD) is output from the 2ND AV jacks. qh SET UP button Press to activate the setup mode, then use the cursor buttons (qk) to select any of the following parameters. You can make various settings using the jog dial (ql). When you select You can Speaker setup Specify the front, center, rear L/R, and rear center speaker sizes, the rear L/R speaker position, and whether or not you are using a sub woofer (page 18). Speaker Distance Specify the front, center, rear L/R, and rear center speaker distances and the unit of measurement (page 20). Crossover frequency* Specify the front, center, and rear L/R speaker bass crossover frequency (page 22). LFE High Cut Frequency Select the cutoff frequency of the LFE channel High Cut Filter (page 22). Distance Unit Specify units for setting speaker distance (page 22). 5.1CH Visual Specify the video input to be used with the audio signals from the 5.1CH INPUT jacks (page 55). Digital Power Management Specify whether or not the system turns off the power of the unnecessary digital circuits automatically (page 55). Video Power Management Specify whether or not the system turns off the power of the unnecessary video circuits automatically (page 55). Sound Field Link Set the automatic application of the sound field to a program source (page 55). Auto Function Specify whether or not Sony components connected via control A1 cords will turn on or off when selected using the function buttons (page 55). 2 Way Remote Turn on or off response to remote signals sent from the 2 way remote (page 56). Command mode Set when you use the second remote in the sub room (page 56). Color System Select the TV color system of the monitor (Except for models (page 56). of area code UC and TW) OSD color Specify the color of the on-screen display (page 56). * Only when the speaker is set to"SMALL" in the speaker setup parameter. qj ENTER button Press to enter individual characters for the preset station and program source names. qk Cursor buttons ( / ) Press to select various speaker level, surround, and equalizer parameters (etc.). 27 Location of Parts and Basic Amplifier Operations