Sony STR-V555ES Operating Instructions - Page 56
Press Set Up., Color System.
View all Sony STR-V555ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Adjustments Using the SET UP Button Other Operations Setting up the 2 way remote This receiver is shipped from the factory with the 2 way remote control system set to "ON". Normally, you can use the receiver as is. However, if you want to use this receiver together with another component that is also compatible with the 2 way remote control system, be sure to perform the following operation to limit response to signals sent from the remote controls. To use with the TA-E9000ES Perform the following steps to turn OFF this unit's 2 way remote control system. Also, be sure the TA-E9000ES is turned on when using this unit. To use with other components that have the logo Turn OFF the other component's 2 way remote control system. For details, refer to the operating instructions suppled with your other components. To use with Sony CD players CDP-CX260 or CDPCX88ES Turn OFF the remote control adapter switch on the CDP-CX260 or CDP-CX88ES. For details, refer to the operating instructions suppled with the CDP-CX260 or CDP-CX88ES. Also when using several 2 way remote control system components together, be sure to place them close together in order to enable proper remote operation. 1 Press SET UP. 2 Press the cursor buttons ( or ) to select "2 WAY REMOTE". 3 Turn the jog dial to select "ON" or "OFF". Selecting the command mode of the remote Change the command mode of the receiver and the supplied remote (RM-TP504) from its default "AV1" setting to "AV2" in the following cases: • When you want to change the output from the 2ND AV jacks using RM-US104 in the 2nd room (Models of area code UC only). • When you want to use 2 Sony receivers in the same room with the remote. 1 Press SET UP. 2 Press the cursor buttons ( or ) to select "COMMAND MODE". 3 Turn the jog dial to select "AV1" or "AV2". Notes • When you change the command mode of the receiver to "AV2", be sure to change the command mode of the supplied remote (RM-TP504) to "AV2". For details, see the operating instructions for the supplied remote (RM-TP504). • For details on how to use RM-US104, see the operating instructions for the supplied remote (RM-US104). Selecting the monitor color system (Except for models of area code UC and TW) Select the color system of your TV monitor. You can select either "NTSC" or "PAL". The default setting is "PAL". 1 Press SET UP. 2 Press the cursor buttons ( or ) to select "COLOR SYSTEM". 3 Turn the jog dial to select "NTSC" or "PAL". Selecting the color of the on-screen display Select the color of the on-screen display. You can select either "COLOR" or "MONOCHROME". The color of the on-screen display is set to "COLOR" by default. 1 Press SET UP. 2 Press the cursor buttons ( or ) to select "OSD COLOR". 3 Turn the jog dial to select "COLOR" or "MONOCHROME". 56