Sony STR-ZA3000ES Installation Guide - Page 7

Connections & settings (multi room/single room), Preparing the receiver, Outline dimensional drawing

Get Sony STR-ZA3000ES PDF manuals and user guides View all Sony STR-ZA3000ES manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

Connections & settings (multi room/single room) Connections & settings (multi room/single room) Preparing the receiver Outline dimensional drawing Top Front Side 174 mm (6 7/8 in) 430 mm (17 in) 10 mm (13/32 in) Attaching/removing the front cover The front cover can be completely removed from the receiver. 378 mm (15 in) 410 mm (16 1/4 in) Remove the front cover by inserting your fingers under the cover. Setting up the receiver We recommend that you activate the following menu items in advance. To activate the network standby mode Select [Setup] - [Network Setup] - [Network Standby] - [On] from the home menu. To turn on the control mode to make an external controller connection Select [Setup] - [Install Setup] - [External Control] - [On] from the home menu. Notes • When the receiver is in standby mode, the / (on/standby) indicator on the front panel lights up in amber if [Network Standby] is set to [On]. • Set [External Control] to [On] to activate the network connection or to activate control from an external controller connected to the RS232C port. 7GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
7
GB
Connections & settings (multi room/single room)
Connections & settings (multi room/single room)
Preparing the receiver
Outline dimensional drawing
Top
Front
Side
²7´ mm (6 7/8 in)
´30 mm (²7 in)
378 mm (²5 in)
´²0 mm (²6 ²/´ in)
²0 mm (²3/32 in)
Attaching/removing the front cover
The front cover can be completely removed from the receiver.
Remove the front cover by inserting
your fingers under the cover.
Setting up the receiver
We recommend that you activate the following menu items in advance.
To activate the network standby mode
Select [Setup] - [Network Setup] - [Network Standby] - [On] from the home menu.
To turn on the control mode to make an external controller connection
Select [Setup] - [Install Setup] - [External Control] - [On] from the home menu.
Notes
•
When the receiver is in standby mode, the
/
(on/standby) indicator on the front panel lights up in
amber if [Network Standby] is set to [On].
•
Set [External Control] to [On] to activate the network connection or to activate control from an external
controller connected to the RS232C port.