Sony SU-FL300L Instructions (SU-FL300M & SU-FL300L TV Stands) - Page 9
Step 4, Installing the TV, Step 5, Safety measures to, prevent toppling over
UPC - 027242720350
View all Sony SU-FL300L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Step 4: Installing the TV 1 Install the TV onto the TV Stand. 1 Referring to the outline of the supplied paper template, match the outline of the Table-Top Stand to the paper template outline, so that the holes at the bottom of the Table-Top Stand align to the sleeves which were attached in part 1 of the Step 3. 2 Slide the TV back to lock into place. 3 Remove the paper template from the Top Board. Paper template Step 5: Safety measures to prevent toppling over WARNING Be sure to take measures to prevent the TV Stand from toppling over, and causing possible injury and damage. 1 Attach the support belt. 1 Screw the support belt (supplied with the TV) to the TV Stand with the wood screw (supplied with the TV) using the screwdriver. 2 Attach the support belt to the Table-Top Stand, and screw the belt with the securing screw (supplied with the TV) using a coin, etc. 3 Adjust the length by tightening the support belt while holding the Table-Top Stand. 2 Attach the anchor bolts. Secure the two supplied anchor bolts to the rear of the TV. Anchor bolt Note If the two anchor bolts are not used to secure the TV, it may fall and cause injury. (Continued) 9 (US)