Sony SVT15113CDS Users Guide - Page 202

VAIO User Guide Troubleshooting How to Use Windows 8: The Basics Parts Description Setup Network / Internet Connections Settings Playback Backup / Recovery Security Other Operations Notifications Search Back | Back to Top Adding and Removing Memory Modules If you want to increase your computer's speed or improve performance when running programs simultaneously, increase the amount of memory by installing optional memory modules. Before you upgrade your computer's memory, see Notes on Adding and Removing Memory Modules.[Details] If you install memory modules into two or more slots, the dual-channel mode is enabled to help improve performance. The type of module and the amount of memory installed on your computer may differ depending on the model. Note After adding a memory module to your VAIO computer, you may not be able to enable the Rapid Wake setting due to the shortage of the dedicated partition volume for Rapid Wake. In such a case, recover the computer. [Details] 1. Turn off your VAIO computer and peripheral devices, disconnect the power cord and all connection cables, and remove the battery pack. [Details] 2. Wait for a while until your VAIO computer cools down. The inner parts of your VAIO computer may be hot just after turning off. Be careful to avoid burns while handling your VAIO computer in this state. 3. Lay a clean cloth on a level, flat surface, place your VAIO computer on it as illustrated below. Remove the screws with a cross slot screwdriver to open the memory module compartment cover. The screw locations are indicated by the arrows in the illustration below. On some models, captive screws are used on the memory module compartment cover and cannot be detached from the cover. SVT131 Screws marked by arrows are behind the battery. SVT141 202