Sony SVT15113CDS Users Guide - Page 203

SVT151 Search 4. Touch an external metal object to discharge static electricity. Do not touch any metal parts inside your VAIO computer. 5. If there is no free slot, remove the currently installed memory module. Pull the latches in the direction of the arrows to pop up the module at an angle (1), then pull the module out in the direction of the arrow (2). 6. Remove the new memory module from its antistatic bag. 7. Hold the memory module by its edge and slide it into the memory module slot with its end terminal facing downward while aligning the notch on the module with the small projection in the slot. 8. Hold the memory module by its edge and push in until it clicks into place as shown in the illustration. The latches on both sides of the slot snap into place to secure the module. Do not touch any ICs (black components) on the memory module. 9. Replace the memory module compartment cover and secure it with the screws you 203