Sony TA-AV521 Operating Instructions - Page 5
Hooking, System
View all Sony TA-AV521 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Hooking Up the System At first, this section describes about the connections with the other audio/video equipments and speakers. After that, it also shows about the remote control system and AC outlet. • Connect the AC power cord last. Make sure power is off. • Jacks arid plugs of the connection cord are color-coded as follows: Red jacks and plugs: For the right channel of audio signals White jacks and plugs: For the left channel of audio signals •The cable connectors should be fully inserted Into the jacks. Loose connections may cause hum and noise. Connecting Audio Equipment Tape deck to LINE OUT to LINE IN Center speaker ' Rear speakers Right Left Front speakers Right Left 00 00 Turntable system to LINE OUT to LINE OUT • CD player1 1 CONTROL S OUT CM: TAPE PEG OUT to LINE OUT _ AC OUTLET' TA-AV521 'P to a wall outlet Tuner to AUDIO OUT it: 0 VCR 7. " 1kt; CONTROL S cord (not supplied) Connect the CONTROL S IN jack of other Sony equipment with the CONTROL S cord for whole audio system remote control. Push in until it clicks. To disconnect. AC OUTLETs (SWITCHED) Use these to power audio component whose power consumption is less than the wattage indicated on the AC outlets. These outlets are controlled by the SYSTEM POWER switch on the front panel. CAUTION Do not connect any electrical home appliances such as an electric iron, fan, TV or other high wattage equipment to these AC outlets. 5