Sony TCD-D3 Primary User Manual - Page 21
rerecorded
View all Sony TCD-D3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
To locate the section to be recorded Desired location to be recorded From the beginning From part way through the tape (from the end of the section you had recorded before). Condition of your tape Operation New tape Wound part way because you had recorded before. New tape, but it has been recorded part way and rewound completely. Recorded tape but it has been rerecorded part way. If you have no idea where you had recorded before. You can begin to record just after setting the tape. You cannot operate any buttons for several seconds while bb 1 oP blinks in the display window. Begin to record after rewinding the tape to the beginning with the REW button. Forward the tape to the end of the section you have recorded before by pressing the FF button. The tape will stop automatically. Locate the boundary between the first section and the second by listening to the sound. Determine the exact boundary by watching the linear counter in the display window. 1 Rewind the tape completely. 2 Press the FF button. The point where the tape stops automatically is the end of the section which you have recorded before. If the tape goes forward to the end of the tape, it indicates that the tape has been fully recorded. The above is necessary to avoid making a blank section on your tapes. See "Note on recording" (page e) for details. When you use a new tape for the first time bb ciP appears in the display window. This shows that BB letters are being recorded on the program number in the read-in section. The readin section enables you to start recording from the beginning of the tape exactly as well as to write and erase the start ID correctly. 21