Sony TCD-D3 Primary User Manual - Page 30

Nice to Know How to adjust the start ID position You can shift the start ID position about 0.3 seconds backward or forward with REW/REVIEW or FF/CUE during rehearsal play. Press ENTER after shifting it to the desired position. The start ID cannot be shfited except in the rehearsal mode. Press START ID ENTER. Each time you press A04 Each time you press sr* -0. After the repeated portion is played back 16 times, the tape stops. Note • You must adjust the position within ten seconds. • You cannot activate any operation buttons other than ■ STOP while the start ID is being written. • When WRITE and START-ID blink quickly during rehearsal play, the start ID cannot be written. • The program number cannot be written when the start ID is written during playback. Erasing start ID Locate the tape at beginning of the desired start ID to be erased. You can erase it during playback or stop mode. Operation Result 1 Locate the tape at the beginning of the desired start ID to be erased. 2 Press START ID ERASE appears in the MODE a few times. display window. 3 Press ENTER during The tape is rewound and playback or stop the start ID is searched mode. for. ERASE blinks during this time. 4 The start ID is erased after being detected. ERASE lights and 02:23 blinks at this time. You cannot hear the sound. Note The program number is erased at the same time you erase the start ID. 30