Sony TMR-BT10 Instruction Manual - Page 7
Charging the unit - stereo transmitter
UPC - 027242697867
View all Sony TMR-BT10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Charging the unit The unit contains a rechargeable Lithium-Ion battery, which should be charged before using for the first time. 1 Connect the supplied AC power adaptor with the battery charging stand. Battery charging stand (supplied) (Rear) 3 Put the unit on the battery charging stand. Portable Stereo Transmitter Contact pin AC power adaptor (supplied) 2 Connect the supplied AC power adaptor to an AC outlet. To an AC outlet Battery charging stand (supplied) Note If the holding clip is turned, the unit cannot be set on the battery charging stand and charging does not start. Turn the holding clip back to the original position before charging. Rest the unit on the battery charging stand so that the unit's terminal for the battery charging stand meets the contact pin on the battery charging stand, and make sure that the indicator (red) lights up. Charging is completed in about 3 hours* and the indicator (red) goes off automatically. * Time required for empty battery to recharge. Tip When charging the battery, the unit is turned off automatically. Continued 7 US