Sony UBP-X1100ES Operating Instructions - Page 30

Internet streaming The picture/sound is poor/certain programs display a loss of detail, especially during fast-motion or dark scenes. • Picture/sound quality may be improved by changing the connection speed. Recommended connection speed is of at least 2.5 Mbps for standard definition video, 10 Mbps for high definition video and at least 25 Mbps for Ultra HD video (depending on the service provider). Internet streaming via Wi-Fi is unstable when connected with Bluetooth device using LDAC. • Set [Wireless Playback Quality] in [Bluetooth Settings] to [Connection] (page 24). There is no options menu during Internet streaming. • Options menu is not available during Internet streaming. Network connection The player cannot connect to the network. • Check the network connection (page 14) and the network settings (page 26). The PC cannot connect to the Internet after [Wi-Fi Protected Setup™ (WPS)] is performed. • The wireless settings of the router may change automatically if you use the Wi-Fi Protected Setup function before adjusting the settings of the router. In this case, change the wireless settings of your PC accordingly. You cannot connect the player to the wireless LAN router. • Check if the wireless LAN router is on. • Move the player and the wireless LAN router closer to each other. • Move the player away from devices that use a 2.4 GHz frequency band such as a microwave, Bluetooth or digital cordless device, or turn off such devices. The desired wireless router do not appear in the wireless network list. • Press RETURN to return to the previous screen, and try wireless setup again. If the desired wireless router is still not detected, select [New connection registration] to perform [Manual registration]. The message [A new software version is available. Please go to the "Setup" section of the menu and select "Software Update" to perform the update.] appears on the screen when turning the player on. • See [Software Update] (page 21) to update the player to a newer software version. Bluetooth connection Bluetooth connection cannot be done/ completed. • Set [Bluetooth Mode] to [On] (page 24). • Make sure the Bluetooth device is turned on and the Bluetooth function is enabled. • Move the Bluetooth device closer to the player. • Connect the player and the Bluetooth device again. You may need to cancel the connection with the player using your Bluetooth device first. • Delete pairing information once from the device list and connected device, before retrying connection. • Connection may not be possible if other Bluetooth devices are present around the player. In this case, turn off the other Bluetooth devices. • The connection registration information has been erased. Perform the connection operation again. There is no sound, the sound skips or fluctuates, or the connection is lost. • DVD AUDIO cannot be played via Bluetooth device due to DRM. • Move the Bluetooth device closer to the player. • Make sure the player is not receiving any interference from a Wi-Fi network, other Bluetooth device, other 2.4 GHz wireless device, or microwave oven. • Check that the Bluetooth connection is properly made between the player and the Bluetooth device. 30