Sony UBP-X1100ES Operating Instructions - Page 31

Additional Information • Connect the player and the Bluetooth device again. • Keep the player away from metal objects or surfaces. Control for HDMI (BRAVIA Sync) The [Control for HDMI] function does not work (BRAVIA Sync). • Check that your TV is connected via the HDMI OUT 1 jack. • Check that [Control for HDMI] in [HDMI Settings] is set to [On] (page 26). • If you change the HDMI connection, turn the player off and on again. • If power failure occurs, set [Control for HDMI] in [HDMI Settings] to [Off], then set [Control for HDMI] in [HDMI Settings] to [On] (page 26). • Check the following and refer to the instruction manual supplied with the component. - the connected component is compatible with the [Control for HDMI] function. - the connected component's setting for the [Control for HDMI] function is correct. • When you connect the player to a TV through a Sound Bar/AV amplifier (receiver), - if the Sound Bar/AV amplifier (receiver) is not compatible with the [Control for HDMI] function, you may be unable to control the TV from the player. - if you change the HDMI connection, disconnect and reconnect the AC power cord, or a power failure occurs, try the following: Switch the input selector of the Sound Bar/AV amplifier (receiver) so that the picture from the player appears on the TV screen. Set [Control for HDMI] in [HDMI Settings] to [Off], then set [Control for HDMI] in [HDMI Settings] to [On] (page 26). Refer to the instruction manual supplied with the Sound Bar/AV amplifier (receiver). The System Power-Off function does not work (BRAVIA Sync). • Check that [Control for HDMI] and [Linked to TV-off] in [HDMI Settings] are set to [On] and [Valid] (page 26). Others Playback does not start from the beginning of content. • Press OPTIONS, and select [Play from beginning]. Playback does not start from the resume point where you last stopped playing. • The resume point may be cleared from memory depending on the disc when - you open the disc tray. - you disconnect the USB device. - you play other content. - you turn off the player. Message Code 1 [Playback stopped. The content being played is protected by Cinavia and is not authorized for playback on this device. For more information, see http://www.cinavia.com. Message Code 1] appears on the screen when playing a disc. • The audio track of the video that you are playing contains a Cinavia code indicating it was intended for presentation using professional equipment only and is not authorized for playback by consumers (page 39). The disc tray does not open and "LOCK" or "D ON" appears on the front panel display. • When "LOCK" appears, the player is locked. To cancel the Child Lock, press  STOP, HOME, and then TOP MENU on the remote until "UNLOCK" appears on the front panel display (page 10). • When "D ON" appears, contact your Sony dealer or local authorized Sony service facility. The disc tray does not open and you cannot remove the disc even after you press  OPEN/CLOSE. • While the player is turned on, press  STOP, HOME, and then TOP MENU on the remote to unlock the tray and disable the Child Lock (page 10). • Try the following: Turn the player off, and disconnect the AC power cord. Reconnect the AC power cord while pressing down  OPEN/CLOSE on the player. Keep pressing down  OPEN/ CLOSE on the player until the tray opens. Remove the disc. 31