Sony VPL BW5 Operating Instructions - Page 40

Setting items Color System Power Saving IR Receiver Lamp Timer Reset Functions Selects the color system of the input signal. If you select "Auto," the projector detects the color system of the input signal automatically. If the picture is distorted or colorless, select the color system according to the input signal. Selects the Power Saving mode. Lamp off: The lamp goes off if no signal is input for 10 minutes. The lamp lights again when a signal is input or any button is pressed. Standby: The projector goes into Standby mode if no signal is input for 10 minutes. To use it, turn on the power again. Off: The projector does not go into Power Saving mode. Selects the remote control detectors (IR Receiver) on the front and rear of the projector. Front & Rear: Activates both the front and rear detectors. Front: Activates the front detector only. Rear: Activates the rear detector only. When replacing the lamps, reset the lamp timer. Initial setting Auto Off Front & Rear - Notes • Press APA when the full image is displayed on the screen. If the projected image includes a black portion around it, the APA function will not work properly and some parts of the image may not be displayed on the screen. - You can cancel the adjustment by pressing APA again while "Adjusting" appears on the screen. - The picture may not be adjusted properly depending on the type of input signal. - Adjust the "Dot Phase," "H Size," and "Shift" items in the INPUT SETTING menu when you adjust the picture manually. • If the input signal is not displayed correctly when "Input-A Signal Sel." is set to "Auto," set it to conform the input signal. 40