Sony VPL BW7 Operating Instructions - Page 27
Turning Off the Power, Press INPUT repeatedly - lcd projector
UPC - 027242775930
View all Sony VPL BW7 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
The ?/1 (On/standby) switch flashes in green, then lights in green. The projector cannot be used while the ?/1 switch is flashing. 3 Turn on the equipment connected to the projector. Refer to the operating instructions of the connected equipment. 4 Press INPUT repeatedly to select the input you want to project on the screen. Each time you press the button, you can select the input in the following sequence. Input-A t HDMI t Video t S-Video To view the picture from Press INPUT to display Computer/Component Input-A connected to the INPUT A connector Computer/VCR, etc. connected to HDMI (digital) connector HDMI Video equipment Video connected to the VIDEO INPUT connector Video equipment connected to the S VIDEO INPUT connector S-Video Notes • If "Auto Input Search" is set to "On," the projector searches for the signals from the connected equipment and displays the input channel where the input signals are found. (1 page 39) • When the analog signal is input from a computer, the Smart APA (Auto Pixel Alignment) feature adjusts the picture of the connected equipment to its clearest. • Depending on the type of your computer, for example a notebook, or an all-in-one LCD type, you may have to switch the computer to output to the projector by pressing certain keys (e.g., / , LCD VGA / , etc.), or by changing your computer's settings. The key used for switching the computer to output to the projector varies depending on the type of computer. F7 or Fx and Fn Turning Off the Power 1 Press the ?/1 switch. A message "POWER OFF? Please press ?/1 key again." appears on the screen. Note The message disappears if you press any button other than the ?/1 switch, or if you do not press any button for five seconds. 2 Press the ?/1 switch again. The ?/1 switch flashes in green and the fan continues to run to reduce internal heat. Also, the ?/1 switch flashes quickly for the first 60 seconds. During this time, you will not be able to light up the ?/1 switch again with this switch. 3 Unplug the AC power cord from the wall outlet after the fan stops running and the ?/1 switch lights in red. 27 Projecting