Sony VPL BW7 Operating Instructions - Page 40

Setting items Power Saving CC Display Lamp Timer Reset Functions Selects the Power Saving mode. Lamp off: The lamp goes off if no signal is input for 10 minutes. The lamp lights again when a signal is input or any button is pressed. Standby: The projector goes into Standby mode if no signal is input for 10 minutes. To use it, turn on the power again. Off: The projector does not go into Power Saving mode. Turns the Closed Captions (CC) function on or off. Off: Turns off the Closed Captions (CC) function. CC1/CC2/CC3/CC4/TEXT1/TEXT2/TEXT3/ TEXT4: Selects a caption channel for the Closed Captions (CC) function. When replacing the lamps, reset the lamp timer. Initial setting Off Off - Notes • Press APA when the full image is displayed on the screen. If the projected image includes a black portion around it, the APA function will not work properly and some parts of the image may not be displayed on the screen. - You can cancel the adjustment by pressing APA again while "Adjusting" appears on the screen. - The picture may not be adjusted properly depending on the type of input signal. - Adjust the "Dot Phase," "H Size," and "Shift" items in the INPUT SETTING menu when you adjust the picture manually. • If the input signal is not displayed correctly when "Input-A Signal Sel." is set to "Auto," set it to conform the input signal. • Closed Captioning is not displayed in the following cases: - while you are operating on-screen menus - while "Please replace the Lamp" is displayed on the screen 40