Sony VPL DS100 Operating Instructions - Page 47
Specifications - lcd projector manual
UPC - 027242641426
View all Sony VPL DS100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Specifications Optical characteristics Projection system 3 LCD panels, 1 lens, projection system LCD panel Superhigh-aperture 0.62-inch SVGA panel, 1,440,000 pixels (480,000 pixels × 3) Lens 1.2 times zoom lens (manual) f 18.0 to 21.6 mm/F 2.2 to 2.4 Lamp 157 W UHP Projection picture size Range: 40 to 150 inches (diagonal measure) Light output ANSI lumen1) 1200 lm Throwing distance (When placing on the floor) When the SVGA signal is input: 40-inch: 1.1 to 1.4 m (3.6 to 4.6 feet) 60-inch: 1.7 to 2.1 m (5.6 to 6.9 feet) 80-inch: 2.3 to 2.8 m (7.5 to 9.2 feet) 100-inch: 2.9 to 3.5 m (9.5 to 11.5 feet) 120-inch: 3.5 to 4.2 m (11.5 to 13.8 feet) 150-inch: 4.4 to 5.3 m (14.4 to 17.4 feet) There may be a slight difference between the actual value and the design value shown above. Electrical characteristics Color system NTSC3.58/PAL/SECAM/ NTSC4.43/PAL-M/PAL-N system, switched automatically/ manually Resolution 600 horizontal TV lines (Video input) 800 × 600 dots (RGB input) Acceptable computer signals2) fH: 19 to 72 kHz fV: 48 to 92 Hz (Maximum input signal resolution: XGA 1024 × 768 fV: 85 Hz) Applicable video signals 15 kHz RGB/Component 50/60 Hz, Progressive Component 50/ 60 Hz, DTV (480/60I, 575/50I, 1080/60I, 480/60P, 575/50P, 1080/50I, 720/60P, 720/50P, 540/60P), Composite video, Y/ C video Speaker Monaural speaker system, 40 × 20 mm (1 5/8 × 13/16 inches), max. 1 W Input/Output Video input INPUT A AUDIO VIDEO: phono type Composite video: 1 Vp-p ±2 dB sync negative (75 ohms terminated) S VIDEO: Y/C mini DIN 4-pin type (male) Y (luminance): 1 Vp-p ±2 dB sync negative (75 ohms terminated) C (chrominance): burst 0.286 Vp-p ±2 dB (NTSC) (75 ohms terminated), burst 0.3 Vp-p ±2 dB (PAL) (75 ohms terminated) HD D-sub15-pin (female) Analog RGB/component: R/R-Y: 0.7 Vp-p ±2 dB (75 ohms terminated) G: 0.7 Vp-p ±2 dB (75 ohms terminated) G with sync/Y: 1 Vp-p ±2 dB sync negative (75 ohms terminated) B/B-Y: 0.7 Vp-p ±2 dB (75 ohms terminated) SYNC/HD: Composite sync input: 1-5 Vp-p high impedance, positive/ negative Horizontal sync input: 1-5 Vp-p high impedance, positive/ negative VD: Vertical sync input: 1-5 Vp-p high impedance, positive/ negative Stereo minijack 500 mVrms, impedance more than 47 kilohms ... 1) ANSI lumen is a measuring method of American National Standard IT 7.228. 2) Set the resolution and the frequency of the signal of the connected computer within the range of acceptable preset signals of the projector. Other Specifications 47