Sony VPL-FH31 Operating Instructions - Page 38
Community, Port No., Timeout, Host Address, Start PJ Link Service, Requires Authentication, Password
View all Sony VPL-FH31 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
-Community: Input the community name of Advertisement and PJ Talk. If the community name for PJ Talk is changed, the one for Advertisement will also be changed. Only four alphanumeric characters can be input. The factory default setting is "SONY." It is recommended that the community name be changed from the factory setting to avoid unnecessary access to the projector from other computers. -Port No.: Input the server port of PJ Talk. The factory default setting is "53484." -Timeout: Input the time (minutes) until PJ Talk communication is terminated in the case that it is disconnected. The factory default setting is "30." -Host Address: Input the IP address that the PJ Talk server is allowed to receive. If no IP address is input, receiving commands will be allowed from any IP address. From the moment the IP address is input, access will be allowed only from that input IP address. For security reasons, it is recommended to input an IP address to restrict access. (d) Set PJ Link. PJ Link Service setting area PJ Link button Start PJ Link Service: Set PJ Link to enabled or disabled. Items for PJ Link are enabled only when this function is enabled. This function is enabled at the factory setting. -Requires Authentication: Set the authentication for PJ Link to enabled or disabled. -Password: Input the authentication password for PJ Link. For the factory default password, refer to the PJ Link specifications. (e) Set the system service. System service setting area Service button Start DDDP Service: Set DDDP to enabled or disabled. For details, refer to the DDDP specifications in the reference from AMX Corporation. The function is disabled at the factory default. Crestron Control: For details, refer to the specifications in product catalogues, etc., from Crestron Corporation. -IP Address: Input the Crestron system server. -IP ID: Input the IP ID for the CIP protocol. -Port No.: Input the port number for the CIP protocol server. 38 Using Network Features