Sony VPL-FHZ60 Operating Instructions - Page 9
Preparation, Connecting the Projector, Connecting a Computer
View all Sony VPL-FHZ60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
B Preparation Connecting the Projector Notes • Turn off all equipment before making any connections. • Use the proper cables for each connection. • Insert the cable plugs firmly; Loose connections may reduce performance of picture signals or cause a malfunction. When pulling out a cable, be sure to grip it by the plug, not the cable itself. • For more information, refer also to the instruction manuals of the equipment you are connecting. • Use a no-resistance audio cable. Connecting a Computer Connection with a computer is explained for each input signal. INPUT A For connecting a computer with an RGB output terminal. RGB output terminal Mini D-sub 15-pin cable (not supplied) Computer Audio output terminal Audio cable (Stereo mini plug) (not supplied) Note It is recommended that you set the resolution of your computer to 1920 × 1200 pixels (VPL-FHZ65/ FHZ60/FHZ57) or 1280 × 800 pixels (VPL-FWZ65/FWZ60) for the external monitor. INPUT B For connecting a computer with a DVI-D output terminal. Computer DVI-D output terminal Audio output terminal DVI-D cable (not supplied) Audio cable (Stereo mini plug) (not supplied) 9