Sony VPL-VW500ES Operating Instructions - Page 41
Using Network Features, Displaying the Control Window of the Unit with a Web Browser
View all Sony VPL-VW500ES manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Using Network Features Connection to the network allows you to operate the following features: • Checking the current status of the unit via a Web browser. • Making the network settings for the unit. • Network monitoring and controlling with control protocol (SDAP [Advertisement], SDCP [PJ Talk], DDDP [AMX], Crestron RoomView, Control4). Notes • When connecting this projector with the network, consult with the person who sets up the network. The network must be secured. • When using this projector connected with the network, access the Control window via a Web browser and change the access limitation of the factory preset values (page 42). It is recommended to change the password regularly. • When the setting on the Web browser is completed, close the Web browser to log out. • The menu displays used for the explanation below may be different depending on the model you are using. • Supported Web browsers are Internet Explorer 8/9/10/11. • The menu displays only English. • If the browser of your computer is set to [Use a proxy server] when you have access to the unit from your computer, click the check mark to set accessing without using a proxy server. • AMX DDDP is not compatible with IPv6. • These network functions are available when the unit is turned on. Displaying the Control Window of the Unit with a Web Browser 1 Connect the LAN cable. LAN cable (straight type) (not supplied) LAN Connector Hub, router, etc. 2 Set the network settings for the unit using "Network Setting" on the Installation menu (page 39). 3 Start a Web browser on the computer, enter the following in the address field, then press the Enter key on your computer. http://xxx.xxx.xxx.xxx (xxx.xxx.xxx.xxx: IP address for the unit) When connecting by the IPv6 address http://[xxxx:xxxx:- xxxx] You can confirm the IP address of the unit under "Network Setting" on the Installation menu. The following window appears in the Web browser: Using Network Features Displaying the Control Window of the Unit with a Web Browser 41