Sony WF-L900 Help Guide - Page 78

4. Insert the driver unit part (b) into your ear (B). 5. Rotate in the direction of the arrow so that the housing part (c) is at the position of the ear (C). 6. Push the fitting supporter (d) into the ear grooves (D). 7. Check if the headset is worn properly. Touch the fitting supporter (d) with your finger and check that it is in the ear grooves (D). Shake your head lightly and make sure that the headset is not out of position. 2 Connect the headset to a Bluetooth device. 3 Operate the Bluetooth device to start playback and adjust the volume to a moderate level. Hint In the factory settings, when you listen to music while wearing both units of the headset, the headset will pause music playback if one or both units are removed. When you put the removed headset unit into your ear again, the headset will resume music playback. The headset supports SCMS-T content protection. You can enjoy music and other audio on the headset from a device such as a portable TV that supports SCMS-T content protection. Depending on the Bluetooth device, it may be necessary to adjust the volume or set the audio output setting on the device. The headset volume during a call and during music playback can be independently adjusted. Changing the call volume does not change the volume of music playback and vice versa. You can also listen to music by removing only one unit from the charging case and putting it into your ear. When you are listening to music with only one unit, if you put the other unit into the other ear, you can listen to music with both units. 78