Sony XAV-70BT Operating Instructions - Page 36
Searching from the Bluetooth device, Connecting, device
UPC - 027242776722
View all Sony XAV-70BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
3 Touch "Search." Search of connectable Bluetooth devices starts.*1*2 After search is complete, the list of detected devices*3 appears. *1 If the Bluetooth signal of this unit is off, it activates automatically when searching starts. *2 Search time varies depending on the number of connectable devices. *3 The name or address (if name is unavailable) of detected devices are displayed. 4 Touch the device to connect. 5 Select the connection type. Touch "Handsfree Connect" to use for handsfree calling. Touch "Audio Connect" to use for audio streaming. Pairing start and the passkey input display appears. 6 Touch the number keys to enter the passkey, then "OK." Perform the required operation also on the other Bluetooth device. Pairing is complete and this unit is connected to the other Bluetooth device. When connection is made successfully, or appears at the bottom of the display. Searching from the Bluetooth device The procedure to search for this unit from the other Bluetooth device is explained below. 1 Select the Bluetooth source. To select Bluetooth Phone, press (TOP), then touch "BT Phone" in the top menu. To select Bluetooth Audio, touch "Source List," then "BT Audio." 2 Touch "BT Menu." In the case of Bluetooth Audio, touch "Play Menu," then "BT Menu." The Bluetooth setting menu appears. 3 Touch "Signal," then "Yes" to set "Signal" to "ON." The Bluetooth signal of this unit is activated. 4 Touch "Discoverable" to set to "Show." The unit is ready to be detected by the other Bluetooth device. 5 Start searching for this unit from the other Bluetooth device. After search is complete, this unit appears as "Sony Automotive"* in the list of the other Bluetooth device. * Can be changed in the Bluetooth setting (page 44). DR-BT30Q Sony Automotive XXXXXXX After you perform the required operation on the other Bluetooth device, the passkey input display appears on this unit. 6 Touch the number keys to enter the passkey, then "OK." Pairing is complete and this unit is connected to the other Bluetooth device. When connection is made successfully, or appears at the bottom of the display. Notes • While connecting to a Bluetooth device, this unit cannot be detected from another device. To enable detection, disconnect the current connection and search for this unit from another device. • Depending on the device, searching from this unit may not be possible. In this case, search for this unit from the other device. • If you search for this unit and the other device mutually at the same time, this unit will not recognize the other device. • It may take time to search or connect. • Depending on the device, the connection confirmation display appears before inputting the passkey. • The time limit for inputting the passkey differs depending on the device. • This unit cannot be connected to a device that supports only HSP (Head Set Profile). Connecting When the ignition is switched to on with the Bluetooth signal activated, this unit searches for the last-connected Bluetooth device, and connection is made automatically if possible. This chapter explains how to connect manually to registered Bluetooth devices. Before starting, be sure to activate the Bluetooth signal both on this unit (page 44) and the other Bluetooth device. 36