Sony XAV-7W Installation Instructions - Page 15

RCA interconnects (optional) Bus cable (5.3 m) (supplied with XT-63V) Front speakers (optional) Amplifiers RCA interconnects (optional) (optional) CONTROL RCA interconnects (5.3 m) (supplied with XT-63V) INPUT Rear speakers (optional) Active subwoofer (optional) Left Front speakers (optional) Right RCA interconnects TV tuner unit XAV (optional) XT-63V (optional) White White/black Gray Gray/black Connection box 1 Main unit/ connection box interconnect 3 Rotary Commander RM-X4S (optional) Left Rear speakers (optional) Right Green Green/black Purple Purple/black Media Center main unit From car antenna To a metal surface of the car*2 To the +12 V power terminal which is energized at all times*1 To the +12 V power terminal which is energized in the accessory position of the ignition key switch*1*3 To a car's illumination signal*1 Black (0.45 m) Yellow (0.25 m) Fuse (10 A) Red (0.25 m) Orange/white (0.25 m) Power supply leads 2 (for main unit) To ATT (the interface cable of a car telephone) To AMP REMOTE IN of an optional power amplifier*4 To the power antenna control lead or power supply lead of antenna booster amplifier*3*5 Light blue (0.25 m) Blue/white (0.25 m) Max. supply current 0.3 A Blue (0.25 m) Max. supply current 0.1 A Parking brake switch lead of car Tap 5 Light green (2 m) *1 Be sure to connect the black ground lead to it first. *2 First connect the black ground lead, then connect the yellow and red power input leads. *3 When your car has built-in FM/AM antenna in the rear/side glass, see "Notes on the control and power supply leads" (previous page). *4 This connection is only for amplifiers. Connecting any other system may damage the unit. *5 It is not necessary to connect this lead if there is no power antenna or antenna booster, or with a manually- operated telescopic antenna. Note on the accessory power input lead (red) If there is no accessory position, connect to the +12 V power (battery) terminal which is energized at all times. 15