Sony XBR-55HX929 Setup Guide (Operating Instructions) - Page 10
: Attaching the Table-Top Stand, For XBR-55/46HX929, KDL-55/46HX820 and, KDL-55/46NX720
View all Sony XBR-55HX929 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
1: Attaching the Table-Top Stand Refer to the supplied Table-Top Stand instruction leaflet for proper attachment. ~ • Do not put stress on the LCD panel or the frame around the screen. • Be careful to not pinch your hands or the AC power cord when you install the TV unit to the Table-Top Stand. For XBR-55/46HX929, KDL-55/46HX820 and KDL-55/46NX720 1 Place the TV unit on the Table-Top Stand. Guide pins For KDL-60NX720 1 Align with the two dowels of the Table-Top Stand, and gently place the TV, checking that the f mark is facing the front. Neck 2 Attach the TV and Table-Top Stand with the supplied screw and hexagon wrench. ~ • Align the TV from the top, slide it in until the guide pins cannot be seen. 2 Use the supplied screws to attach the TV unit to the Table-Top Stand. * Head * 3 N·m {30 kgf·cm} ~ • If you use an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. ~ • Tighten to approximately 3 N·m {30 kgf·cm}. 10