Sony XBR-55X850A i-Manual Online (Printable PDF) - Page 218
too bright, No color/Dark picture/color is not correct/Picture is - input lag
View all Sony XBR-55X850A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 218 highlights
Keep the antenna/cable away from other connecting cables. When installing optional device, leave some space between the device and TV. Set [Motionflow] to [Standard] or [Off]. (For [Motionflow] compatible models only.) Change the current setting of [CineMotion] to another setting. Set [LNA] to [Off] to improve picture reception. ([LNA] may not be available depending on the situation/region/country.) Perform [Fine Tune]/[AFT] to improve picture for analog reception. Keep the TV away from noise sources such as mobile phones, cars, motorcycles, or hair-dryers, Wi-Fi units, or optical device. Make sure that the antenna is connected using a 75-ohm coaxial cable. The screen flickers. Set [Motionflow] to other than [Impulse] (e.g. [Standard]). No color/Dark picture/color is not correct/Picture is too bright Press the OPTIONS button, then select [Picture Adjustments] to make adjustments. Select [Reset] in [Picture Adjustments]. If you set [Power Saving] to [Low] or [High], black level will be enhanced. Blurry picture or poor color. Transporting the TV from a cold to a warm location or a sudden change in room temperature may cause moisture condensation, resulting in a blurry picture or poor color. Turn off your TV and wait a few hours before powering on again. There is lag between video and sound. When enjoying Karaoke from a connected device, set [Scene Select] to [Game]. Screen format/wide mode changes automatically. When changing the channel or video input, if [Auto Wide] in [Screen] is set to [On], the current [Wide Mode] setting is automatically changed according to the input signal. To lock in [Wide Mode] selected with the 218