Sony XBR-85X900F Reference Guide - Page 12
Remote Rs-232c, Remote Ir In, Video In, Audio Out, Ir Blaster, Usb 1/2, Usb 3, Hdmi In 1/2/3/4
View all Sony XBR-85X900F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
REMOTE RS-232C REMOTE IR IN • These jacks are for receiving the external control signal. Enables extended control of the TV using RS-232C via the RS-232C and IR IN jacks. RS-232C: connect to the RS-232C terminal of the home controller. IR IN: connect to the IR out terminal of the home controller. • Take care to not connect to headphones or an external audio system. / VIDEO IN • For a composite connection, use an Analog Extension Cable (not supplied). • 3.5 mm 1: L 2: Video 3: Ground 4: R 12 34 AUDIO OUT / • Supports 3-pole stereo mini jack only. • To listen to the TV's sound through the connected equipment, press HOME. Select [Settings] t [Sound] t [Headphone/Audio out] and then select the desired item. IR BLASTER* • Use your Sony remote control to control your Set Top Box (cable/ satellite box). Connect the IR Blaster Cable (supplied) to the IR Blaster port on your TV. Place one or both of the other two ends as shown below. USB 1/2, USB 3 • Connecting a large USB device may interfere with other connected devices beside it. • When connecting a large USB device, connect to the USB 1 port. HDMI IN 1/2/3/4 • HDMI interface can transfer the digital video and audio on a single cable. • < 12 mm < 21 mm • HDMI IN 3 ARC (Audio Return Channel) Connect your audio system to the HDMI IN 3 to route TV audio to your audio system. An audio system that supports HDMI ARC can send video to the TV, and receive audio from the TV via the same HDMI cable. If your audio system does not support HDMI ARC, an additional connection with DIGITAL AUDIO OUT (OPTICAL) is necessary. * Only on limited region/country/TV model. • To perform IR Blaster setup, press HOME and select [Settings] t [External inputs] t [IR Blaster setup]. 12US