Sony XCES30CE User Manual (XCES_Series_User_Guide) - Page 5
Main Specifications
View all Sony XCES30CE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
MAIN SPECIFICATIONS XC-E series Image pickup device XC-ES50/50CE, XC-EI50/50CE: 1/2-inch interline transfer CCD XC-ES30/30CE, XC-EI30/30CE: 1/3-inch interline transfer CCD Number of effective pixels XC-ES50/EI50, XC-ES30/EI30: 768 (H)x494 (V) XC-ES50CE/EI50CE, XC-ES30CE/EI30CE: 752 (H)x582 (V) CCD horizontal driving frequency XC-ES50/EI50, XC-ES30/EI30: 14.318 MHz XC-ES50CE/EI50CE, XC-ES30CE/EI30CE: 14.187 MHz CCD vertical driving frequency XC-ES50/EI50, XC-ES30/EI30: 15.734 kHz XC-ES50CE/EI50CE, XC-ES30CE/EI30CE: 15.625 kHz Signal system EIA/CCIR Cell size XC-ES50/EI50: 8.4 (H)x9.8 (V) µ m XC-ES50CE/EI50CE: 8.6 (H)x8.3 (V) µ m XC-ES30/EI30: 6.35 (H)x7.4 (V) µ m XC-ES30CE/EI30CE: 6.5 (H)x6.25 (V) µ m Lens mount C-mount Flange back 17.526 mm Synchronization system Internal/external (Selected automatically) External sync input/output HD/VD (2 to 5 Vp-p) * Automatically selected according to the existence of an input signal when the selection switch on the rear panel is set to EXT. Allowable frequency deviation of external synchronization ± 1 % (in horizontal synchronous frequency) Jitter Within ± 50 nsec Scanning system 2:1 interlacing Non-interlacing (during external sync input) Horizontal resolution XC-ES50/EI50, XC-ES30/EI30: 570 TV lines XC-ES50CE/EI50CE, XC-ES30CE/EI30CE: 560 TV lines Sensitivity XC-ES50/50CE: 400 lx F5,6 (γ =ON, MIN Gain, without IR cut filter) XC-ES30/30CE: 400 lx F4 (γ =ON, MIN Gain, without IR cut filter) XC-EI50/50CE: 400 lx F11 (γ =OFF, MIN Gain, without IR cut filter) XC-EI30/30CE: 400 lx F8 (γ =ON, MIN Gain, without IR cut filter) S/N ratio 60dB Minimum illuminance XC-ES50/50CE, XC-ES30/30CE: 0.3 lx (F1.4 γ =ON, MAX Gain, without IR cut filter) XC-EI50/50CE: 0.1 lx (F1.4 γ =ON, MAX Gain, without IR cut filter) XC-EI30/30CE: 0.2 lx (F1.4 (γ =ON, MAX Gain, without IR cut filter) Gain AGC/Manual (Can be selected using the switch on the rear panel.) Gamma correction ON/OFF (Can be selected using the switch on the rear panel.) Electronic shutter XC-ES50/EI50, XC-ES30/EI30: 1/100 to 1/10,000 seconds XC-ES50CE/EI50CE, XC-ES30CE/EI30CE: 1/120 to 1/10,000 seconds External trigger shutter XC-ES50/EI50, XC-ES30/EI30: 1/4 to 1/10,000 seconds XC-ES50CE/EI50CE, XC-ES30CE/EI30CE: 1/4 to 1/8,000 seconds *Set using the DIP switch on the rear panel, or variable with the trigger pulse width. Supply voltage +12 VDC (+9.0V to 16V) Power consumption XC-ES30/30CE, XC-EI30/30CE: 1.4W XC-ES50/50CE, XC-EI50/50CE: 1.6W Operating temperature -5 ˚C to +45 ˚C Storage temperature -20 ˚C to +60 ˚C Performance assurance temperature 0 ˚C to +30 ˚C Operating humidity 20 to 80 % (Non-condensing) Storage humidity 20 to 95 % (Non-condensing) Vibration resistance 10G (For 20 minutes in the X, Y, and Z directions at 20 to 200 Hz) 3