Sony XR-CA600X Primary User Manual - Page 9

Cassette Player Listening to a tape 1 Press (OPEN) and insert a cassette. Playback starts automatically. 2 Close the front panel. If a cassette is already inserted, press (SOURCE) repeatedly until "FORWARD" or "REVERSE" appears to start playback. FORWARD: The side facing up is played. REVERSE: The side facing down is played. To Press Change the tape's (MODE) (o) playback direction Stop playback (OFF) Eject the cassette (OPEN) then Z Skip tracks - Automatic Music Sensor (SEEK) (./>) [once for each track] Fast-forward/ (SEEK) (m/M) reverse [hold to desired point] - Manual Search Note The AMS function may not work when: - the blanks between tracks are shorter than 4 seconds. - there is noise between tracks. - there are long sections of low volume or quiet sections. Playing a tape in various modes You can play the tape in various modes: • METAL lets you play a metal or CrO2 tape. • BL.SKP (Blank Skip) skips blanks longer than 8 seconds. • ATA (Automatic Tuner Activation) turns on the tuner automatically when fast-winding the tape. • NR (Dolby NR) lets you select the Dolby* NR B system (XR-CA610X only). * Manufacutured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. 1 During tape playback, press (MENU). 2 Press either side of (DISC/PRESET) repeatedly until the desired mode appears. 3 Press (+) side of (SEEK) to select "ON." Example: ATA mode Play mode starts. 4 Press (ENTER). To return to normal playback mode, select "OFF" in step 3. Playing tracks repeatedly - Repeat Play During playback, press (1) (REP) repeatedly until "REP-ON" in the display appears. To return to normal playback mode, select "REPOFF." Tip During repeat playback, press (MODE). "REP" disappears from the display and repeat mode is canceled. 9