Sony XSP-N1BT Operating Instructions - Page 8
Connecting with a paired BLUETOOTH, device, Connecting with a Smartphone by One, touch NFC - compatible phones
View all Sony XSP-N1BT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Input passkey [0000] When pairing is made, stays lit. 7 Select this unit on the BLUETOOTH device to establish the BLUETOOTH connection. or lights up when the connection is made. Note While connecting to a BLUETOOTH device, this unit cannot be detected from another device. To enable detection, enter the pairing mode and search for this unit from another device. To cancel pairing Perform steps 2 and 3 to cancel the pairing mode after this unit and the BLUETOOTH device are paired. Connecting with a paired BLUETOOTH device To use a paired device, connection with this unit is required. Some paired devices will connect automatically. 1 Press CALL. 2 Press / to select [BT SIGNL], then press ENTER. Make sure that lights up. 3 Activate the BLUETOOTH function on the BLUETOOTH device. 4 Operate the BLUETOOTH device to connect to this unit. or lights up. Icons in the display: Lights up when a cellular phone is connected to the unit. Lights up when an audio device is connected to the unit. Indicates the signal strength status of connected cellular phone. To connect the last-connected device from this unit Activate the BLUETOOTH function on the BLUETOOTH device. Press SOURCE. Select [BT PHONE] or [BT AUDIO]. Press ENTER to connect with the cellular phone, or PAUSE to connect with the audio device. Note While streaming BLUETOOTH audio, you cannot connect from this unit to the cellular phone. Connect from the cellular phone to this unit instead. Tip With BLUETOOTH signal on: when the ignition is turned to on, this unit reconnects automatically to the lastconnected cellular phone. To install the microphone For details on how to connect the microphone, refer to the supplied "Installation/Connections" guide. Connecting with a Smartphone by One touch (NFC) By touching the N-Mark part of the unit with an NFC* compatible smartphone, the unit is paired and connected with the smartphone automatically. * NFC (Near Field Communication) is a technology enabling short-range wireless communication between various devices, such as mobile phones and IC tags. Thanks to the NFC function, data communication can be achieved easily just by touching the relevant symbol or designated location on NFC compatible devices. For a smartphone with Android OS 4.0 or lower installed, downloading the app "NFC Easy Connect" available at Google Play™ is required. The app may not be downloadable in some countries/regions. 1 Activate the NFC function on the smartphone. For details, refer to the operating instructions supplied with the smartphone. 2 Touch the N-Mark part of the unit with the N-Mark part of the smartphone. Make sure that lights up on the display of the unit. 8GB