Sony ZS-X7 Primary User Manual - Page 24

Using the player on car battery, Preparing the power sources - car battery cord

Page 24 highlights

Preparing the power sources (continued) Notes • Use only the supplied car battery cord (DCCEC12). Do not use any other car battery cord. Polarity of the plug • Use the supplied car battery cord only with a negative # grounded car that uses a 12 V battery. • If the inside of the cigarette lighter socket is dirty with ashes, etc., the plug of the car battery cord may become heated due to a bad contact. Before connecting the cord, be sure to clean the socket. • When listening to the radio on this player, the car battery cord may cause noise. Extend it as long as possible, and keep it as far away as possible from the player. 4 Using the player on car battery Insert one end of the supplied car battery cord (DCCEC12) to the DC IN 10.6 - 12 V socket located on the side of the player, and the other end to a cigarette lighter socket. to a cigarette lighter socket DC IN 10.6 - 12 V To replace the fuse of the car battery cord Be sure to use the fuse with the correct amperage. (4 A, 125 V, length 31.75 mm) Remove Fuse Plug end Tighten Cigarette lighter plug 24 Setting Up

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

Setting Up
24
4
Using the player on car battery
Insert one end of the supplied car battery cord (DCC-
EC12) to the DC IN 10.6 – 12 V socket located on the
side of the player, and the other end to a cigarette
lighter socket.
To replace the fuse of the car battery cord
Be sure to use the fuse with the correct amperage.
(4 A, 125 V, length 31.75 mm)
Notes
Use only the supplied
car battery cord (DCC-
EC12). Do not use any
other car battery cord.
Polarity of the plug
Use the supplied car
battery cord only with
a negative
#
grounded
car that uses a 12 V
battery.
If the inside of the
cigarette lighter socket
is dirty with ashes, etc.,
the plug of the car
battery cord may
become heated due to a
bad contact. Before
connecting the cord, be
sure to clean the socket.
When listening to the
radio on this player, the
car battery cord may
cause noise. Extend it
as long as possible, and
keep it as far away as
possible from the
player.
to a cigarette lighter socket
DC IN 10.6 – 12 V
Remove
Plug end
Tighten
Cigarette lighter plug
Fuse
Preparing the power sources
(continued)