Stihl 032 Instruction Manual - Page 70
Cutting Techniques
![]() |
View all Stihl 032 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
English / USA B B = Pushback: Pushback occurs when the chain on the top of the bar is suddenly stopped when it is pinched, caught or encounters a foreign object in the wood. The reaction of the chain drives the saw straight back toward the operator and may cause loss of saw control. Pushback frequently occurs when the top of the bar is used for cutting. To avoid pushback 1. Be alert to forces or situations that may cause material to pinch the top of the chain. 2. Do not cut more than one log at a time. 3. Do not twist the saw when withdrawing the bar from a plunge cut or underbuck cut because the chain can pinch. 001BA038 KN 001BA088 LÄ Cutting Techniques Felling Felling is cutting down a tree. Before felling a tree, consider carefully all conditions which may affect the direction of fall, including: The intended direction of the fall. The natural lean of the tree. Any unusually heavy limb structure. Surrounding trees and obstacles. The wind direction and speed. !Warning! Always observe the general condition of the tree. Inexperienced users should never attempt to cut trees which are decayed or rotted inside or which are leaning or otherwise under tension. There is an increased risk that such trees could snap or split while being cut and cause serious or fatal injury to the operator or bystanders. Also look for broken or dead branches which could vibrate loose and fall on the operator. When felling on a slope, the operator should stand on the uphill side if possible. 1 1/2 1 21/2 Felling Instructions: When felling, maintain a distance of at least 21/2 tree lengths from the nearest person. When felling in the vicinity of roads, railways and power lines, etc., take extra precautions. Inform the police, utility company or railway authority before beginning to cut. !Warning! The noise of your engine may drown any warning call. !Warning! There are a number of factors that may affect and change the intended direction of fall, e.g. wind, lean of tree, sloping ground, one-sided limb structure, wood structure, decay, snow load, etc. To reduce the risk of severe or fatal injury to yourself or others, look for these conditions prior to beginning the cut, and be alert for a change in direction while the tree is falling. 18 Chainsaw Safety Manual
![](/manual_guide/products/stihl-032-instruction-manual-a255ffb/70.png)