Stihl 032 Instruction Manual - Page 79

English / USA

Get Stihl 032 PDF manuals and user guides View all Stihl 032 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 79 highlights

Please note that the following maintenance intervals apply for normal operating conditions only. If your daily working time is longer than normal or cutting conditions are difficult (very dusty work area, resin-rich wood, tropical wood etc.), shorten the specified intervals accordingly. If you only use the saw occasionally, extend the intervals accordingly. Carburetor Spark plug All accessible screws and nuts (not adjusting screws) 2) Spark arresting screen* in muffler Chain catcher Check idle adjustment - chain must not rotate X X Readjust idle Readjust electrode gap Retighten Inspect Clean or replace Check X Replace 2) Firmly tighten cylinder base screws of professional saws (3.4 kW or more) after 10 to 20 hours of operation before starting work after finishing work or daily after each refueling stop weekly monthly every 12 months if problem if damaged as required English / USA X X X X X X * see "Guide to Using this Manual" Chainsaw Safety Manual 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
27
Chainsaw Safety Manual
English / USA
2)
Firmly tighten cylinder base screws
of professional saws (3.4 kW or
more) after 10 to 20 hours of
operation
*
see “Guide to Using this Manual“
Please note that the following maintenance intervals apply for normal
operating conditions only. If your daily working time is longer than normal or
cutting conditions are difficult (very dusty work area, resin-rich wood,
tropical wood etc.), shorten the specified intervals accordingly. If you only
use the saw occasionally, extend the intervals accordingly.
before
starting work
after finishing
work or daily
after each
refueling stop
weekly
monthly
every 12 months
if problem
if damaged
as required
Carburetor
Check idle adjustment – chain must not rotate
X
X
Readjust idle
X
Spark plug
Readjust electrode gap
X
All accessible screws and nuts
(not adjusting screws)
2)
Retighten
X
Spark arresting screen* in muffler
Inspect
X
Clean or replace
X
Chain catcher
Check
X
Replace
X