Stihl BR 450 C-EF Instruction Manual - Page 17

Opening the threaded filler cap English Information Before You Start Positions of Master Control Lever Starting / Stopping the Engine Starting the Engine N Turn the cap counterclockwise until it can be removed from the tank opening. N Remove the filler cap. Refueling Take care not to spill fuel while fueling and do not overfill the tank. Closing the threaded filler cap 002BA447 KN 3 1 2 1 Setting lever 2 Throttle trigger 3 Starter switch (BR 450 C only) Engine stop 0 - ignition interrupted, engine stops. The setting lever does not remain in ths position, it springs back. Normal run position F - engine runs or is ready to start. Throttle trigger can be moved to any position. 1 0014BA001 AS N Observe safety precautions. NOTICE Start your unit on a clean, dust-free surface only to ensure that no dust is sucked in. N Move the setting lever to F L H LA 0416BA011 KN 0009BA012 KN 0416BA013 KN 002BA448 KN N Position cap. N Turn the cap clockwise as far as it will go and tighten it as securely as possible by hand. 2 Infinitely variable throttle setting - throttle trigger can be locked in any required position: Move setting lever (1) upwards until required engine speed is reached. To disengage, move the setting lever back to the normal run position F. N Press the fuel pump bulb at least eight times - even if the bulb is filled with fuel. BR 450, BR 450 C 15