Stihl FG 3 Instruction Manual

Stihl FG 3 Manual

Get Stihl FG 3 PDF manuals and user guides View all Stihl FG 3 manuals
Add to My Manuals
Save this manual to your list of manuals

Stihl FG 3 manual content summary:

  • Stihl FG 3 | Instruction Manual - Page 1
    STIHL FG 3 @ Gebrauchsanleitung @ InstructionManual CD Noticed'emploi CD Instruccionesde seNicio CD Istruzioniper I'uso o Instrug6es de seNigo
  • Stihl FG 3 | Instruction Manual - Page 2
    Stihl Pictograms All the pictograms attached to the machine are shown and explained in the this manual. The operating and handling instructions are supported risk of damaging the power tool or individual components. Note or hint which is not essential for using the power tool, but may improve the
  • Stihl FG 3 | Instruction Manual - Page 3
    the safety precautions and specifications in these instructions and the owner's manual of the saw model on which the filing tool is mounted can help reduce the risk of injury and damage to the saw. The STIHL filing tool can be used to sharpen all STIHL Oilomatic saw chains with the exception of
  • Stihl FG 3 | Instruction Manual - Page 4
    Setting Up 1 1 2 : Place the filing tool on the guide bar. 4 3 : The clamping jaws (1) filing tool above the chain. : Tighten the second clamping jaw with the clamp screw (4) so that the chain can still be pulled along the bar with a screwdriver or suitable rod engaged in a cutter. 14 FG
  • Stihl FG 3 | Instruction Manual - Page 5
    566BA005 KN 566BA006 KN english 2 3 3 : Fit the specified chain sharpening file (2) in the two holders on the filing tool and secure in positon with the screws (3). Use only special saw chain sharpening files. Other files are unsuitable for sharpening chains because they have the wrong shape
  • Stihl FG 3 | Instruction Manual - Page 6
    the center of the stop roller (5). 6 : Rotate height adjusting screw (7) (counterclockwise to lower file - clockwise to raise file) until 1/10 of file diameter projects above top plate. 566BA008 KN : Position the file (6) between the side plate and depth gauge of the master cutter by swinging and
  • Stihl FG 3 | Instruction Manual - Page 7
    rotate the knurled nut a little more until the side plate presses against the file and the stop bar (10) is lifted about 0.1 to 0.2 mm off the roller (4). : Sharpen the master cutter with 2 to 3 firm strokes of the file. Always file from the inside to the outside of the side plate. : The stop bar
  • Stihl FG 3 | Instruction Manual - Page 8
    of cutters After sharpening all the cutters in the first row, reset the filing tool to sharpen the second row as described in chapter "Adjustments". A After 0.404 (mm) (6,35) (9,32) (9,32) (8,25) (9,32) (10,26) Filing Gauge Part No. 1110 893 4000 0000 893 4000 1110 893 4000 1110 893 4000 1110 893
  • Stihl FG 3 | Instruction Manual - Page 9
    file and fit the triangular file (2) 0811 421 8971 in its place. : Set filing angle to 0°. : Pull chain along bar until the depth gauge is under the file so that the depth gauge is filed back to the required height (flush with gauge). Then remove the filing gauge and file down all depth gauges to the
  • Stihl FG 3 | Instruction Manual - Page 10
    english Main Parts 1 2 3 4 5 10 6 7 1 Guide 2 Height adjusting screw 3 Lateral adjusting screw 4 Stop bar 5 Sharpening file 6 Adjusting screw 7 Wing screw 8 Stop 9 Clamp screw 10 Clamping jaws 20 8 9 10 566BA001 KN FG 3
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
STIHL
FG 3
@
Gebrauchsanleitung
@
InstructionManual
CD
Noticed'emploi
CD
Instruccionesde seNicio
CD
Istruzioniper I'uso
o
Instrug6es de seNigo