Stihl FG 3 Instruction Manual - Page 9

the required height flush with, gauge. Then remove the filing

Get Stihl FG 3 PDF manuals and user guides View all Stihl FG 3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

4 2 3 566BA016 KN 566BA015 KN : Remove round file and fit the triangular file (2) 0811 421 8971 in its place. : Set filing angle to 0°. : Pull chain along bar until the depth gauge is under the file. : Adjust stop (3) until it butts against the back of the cutter. : Rotate height adjusting screw (4) so that the depth gauge is filed back to the required height (flush with gauge). Then remove the filing gauge and file down all depth gauges to the same setting. a 566BA017 KN : Finish off by filing the slope by hand, parallel to the stamped marking, until dimension "a" is approx. 0.5 mm. FG 3 english 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
19
FG 3
english
:
Remove round file and fit the
triangular file
(2)
0811 421 8971 in
its place.
:
Set filing angle to 0°.
:
Pull chain along bar until the depth
gauge is under the file.
:
Adjust stop
(3)
until it butts against
the back of the cutter.
:
Rotate height adjusting screw
(4)
so
that the depth gauge is filed back to
the required height (flush with
gauge). Then remove the filing
gauge and file down all depth
gauges to the same setting.
:
Finish off by filing the slope by hand,
parallel to the stamped marking,
until dimension
“a”
is approx.
0.5 mm.
3
2
566BA015 KN
566BA016 KN
4
566BA017 KN
a