Stihl FG 3 Instruction Manual - Page 7
Sharpening, from the inside to the outside of
 |
View all Stihl FG 3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Sharpening english 10 4 9 8 12 3 10 4 12 566BA010 KN 566BA011 KN : Rotate the knurled nut (8) to move stop (9) up against the back of the cutter to be sharpened. : Now rotate the knurled nut a little more until the side plate presses against the file and the stop bar (10) is lifted about 0.1 to 0.2 mm off the stop roller (4). : Sharpen the master cutter with 2 to 3 firm strokes of the file. Always file from the inside to the outside of the side plate. : The stop bar (1) should now locate against the stop roller (2). If this is not the case, readjust the stop (3) slightly and pull the chain up against it. Check the position of the stop again. FG 3 17
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10
 |
 |
17
FG 3
english
:
Rotate the knurled nut
(8)
to move
stop
(9)
up against the back of the
cutter to be sharpened.
:
Now rotate the knurled nut a little
more until the side plate presses
against the file and the stop bar
(10)
is lifted about 0.1 to 0.2 mm off the
stop roller
(4)
.
:
Sharpen the master cutter with 2 to
3 firm strokes of the file. Always file
from the inside to the outside of the
side plate.
:
The stop bar
(1)
should now locate
against the stop roller
(2)
.
If this is not the case, readjust the
stop (
3)
slightly and pull the chain up
against it. Check the position of the
stop again.
9
10
10
4
8
566BA010 KN
4
Sharpening
2
1
1
3
2
566BA011 KN