Stihl FS 460 C-EM Product Instruction Manual - Page 30
Starting the Engine, Starting, firmly, As soon as the engine runs, it might otherwise, break
View all Stihl FS 460 C-EM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
6BA013 KN English Starting the Engine 4 N Press the fuel pump bulb (4) at least five times - even if the bulb is already filled with fuel. 5 N Press in the outer edge (arrows) of the choke knob (5) and then turn it to } . Starting 1BA001 KN 9926BA006 KN the cutting attachment is not touching the ground of any other obstacles. N Make sure you have a firm footing - either standing, stooping or kneeling. N Hold the unit firmly on the ground with your left hand and press down - do not touch the throttle trigger or lockout lever. Do not stand or kneel on the drive tube. N Hold the starter grip with your right hand. Alternative method of starting: Engine warm and the machine hanging from the harness. 6BA012 KN N Hold the machine firmly with your right hand on the drive tube, handle support or handlebar. N With the machine behind you, press it against the left side of your body. N Hold the starter grip with your left hand. N Pull the starter grip steadily. Do not pull out the starter rope all the way - it might otherwise break. N Do not let the starter grip snap back. Guide it slowly back into the housing so that the starter rope can rewind properly. N Continue cranking until the engine runs. As soon as the engine runs 6BA011 KN 6BA014 KN N Place the unit on the ground: It must rest securely on the engine's guard plate and the deflector. Check that 28 N Press down the throttle trigger interlock and open the throttle - the choke lever moves to the run FS 460 C-M, FS 460 C-M L