Stihl FS 460 C-EM Product Instruction Manual - Page 39
Sharpening Metal Cutting, Blades, Inspection and, Maintenance by User
View all Stihl FS 460 C-EM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Sharpening Metal Cutting Blades N Use a sharpening file (special accessory) to sharpen dull cutting attachments. In case of more serious wear or nicks: Resharpen with a grinder or have the work done by a dealer - STIHL recommends a STIHL servicing dealer. N Resharpen frequently, take away as little material as possible: two or three strokes of the file are usually enough. 1 2 1 1 2 2 002BA042 KN N Resharpen the cutters (1) uniformly - do not alter the contour or the parent blade (2) in any way. See cutting attachment packaging for additional sharpening instructions. Balancing N After resharpening about 5 times, check the cutting attachment for out-of-balance on a STIHL balancer (special accessory) or have it checked by a dealer and rebalanced as necessary - STIHL recommends a STIHL servicing dealer. English Inspection and Maintenance by User Clamped area of handlebar 2 1 N Check the freedom of movement of the handlebar (1) in the clamp moldings (2) at regular intervals. If the handle is stiff: 3 1 N Loosen the clamp screw (3) so that the handlebar can be moved. N Push the handlebar (1) sideways out of the clamp. N Use a cloth with a fresh, nonflammable cleaning solution. N Thoroughly clean the clamp area of the handlebar with the cloth and cleaning solution. N Line up the handlebar and secure it in position with the clamp screw. 6BA022 KN 6BA021 KN FS 460 C-M, FS 460 C-M L 37