Stihl FS 56 RC-E Product Instruction Manual - Page 16
Risk of Kickout Blade Thrust with All - parts manual
View all Stihl FS 56 RC-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
English Do not continue using the mowing head if the raised moldings (1) on the base are missing or worn - see right illustration above. The mowing head may otherwise shatter and flying objects could result in injury to the operator or bystanders. Install a new mowing head. Risk of Kickout (Blade Thrust) with All Rigid Cutting Blades Warning! Kickout (blade thrust) is the sudden and uncontrolled motion towards the operator's right or rear that can occur when the shaded area (especially the darkly shaded area) of a rotating blade comes in contact with a solid rigid object like a tree, rock, bush or wall. The rapid counterclockwise rotation of the blade may be stopped or slowed, and the cutting attachment may be thrown to the right or to the rear. 002BA135 KN 002BA355 KN This kickout (blade thrust) may cause loss of control of the power tool and may result in serious or fatal injury to the operator or bystanders. To reduce the risk of injury, extreme caution should be used when cutting with the shaded area of any rigid blade. Using the Grass Cutting Blade All kinds of grass and weeds can be easily cut with the grass cutting blade. The power tool is swept in an arc similar to a scythe. Warning! To reduce the risk of serious or fatal injury from blade breakage, never attempt to use this blade to cut woody materials. The 4-tooth grass cutting blade is intended to cut grass and weeds. It has 4 cutting knives with cutting edges on both sides, i.e. front and rear. When the cutting edges on one side become dull, the blade can be turned over to utilize the cutting edges on the other side. The 8-tooth grass cutting blade is recommended for cutting fern or reed. Both types of grass cutting blade have to be resharpened when all cutting edges are dull. MAINTENANCE, REPAIR AND STORING Maintenance, replacement, or repair of the emission control devices and systems may be performed by any nonroad engine repair establishment or individual. However, if you make a warranty claim for a component which has not been serviced or maintained properly or if nonapproved replacement parts were used, STIHL may deny coverage. Warning! Use only identical STIHL replacement parts for maintenance and repair. Use of non-STIHL parts may cause serious or fatal injury. Strictly follow the maintenance and repair instructions in the appropriate sections of your instruction manual. Warning! Always stop the engine and make sure that the cutting attachment is stopped before doing any maintenance or repair work or cleaning the power tool. Do not attempt any maintenance or repair work not described in your instruction manual. Have such work performed by your STIHL servicing dealer only. Wear gloves when handling or performing maintenance on blades. 14 FS 56, FS 56 R, FS 56 C, FS 56 RC