Stihl HS 82 T Product Instruction Manual - Page 17
close it - see Closing.
View all Stihl HS 82 T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
English 001BA239 KN 001BA241 KN 001BA233 KN N Push the filler cap down and twist it clockwise until it engages. Filler cap is now closed. If the filler cap will not engage into the tank housing 001BA231 KN The base of the filler cap is rotated in relation to the upper part. N Look at the black alignment marks on the top of the filler cap. Then the markings on filler cap and housing will align. 1 N With the filler cap in the filling neck, twist it counterclockwise until it drops into its seat. N Continue to twist the filler cap counterclockwise (approx. 1/4 turn) - this will twist the base of the cap into the correct position. N While pushing down on the cap, twist the filler cap clockwise and close it - see section "Closing." 001BA238 KN 001BA235 KN N Flip the handle down. Left: Right: Base of filler cap is rotated - interior marking (1) is aligned with the exterior marking. Base of filler cap is in the correct position - interior marking is below the clip. It does not align with the exterior marking. HS 82 R, HS 82 T 15