Stihl HS 82 T Product Instruction Manual - Page 18

0023BA006 KN 0023BA007 KN 443BA039 KN English Rear Handle 2 Starting / Stopping the Engine N Observe safety precautions - see chapter on "Safety Precautions and Working Techniques". 1 The rear handle can be turned through 90° to the left or right for better control and comfort in all cutting situations. N Let go of the throttle trigger. Do not open the throttle. N Release the lock (1). N Turn the handle (2) to the required position and re-engage the lock (1). The throttle trigger may be used again when the handle is locked in position. Do not operate the throttle while the handle lock is released. Never release the lock while you are operating the throttle. 1 2 4 3 The stop switch (1) is in the normal run position I. N Depress the trigger lockout (2) and pull the throttle trigger (3) - hold them in that position. N Press in the starting throttle lock (4). N Let go of the lockout lever, throttle trigger and starting throttle lock. This is the starting throttle position. 5 N Set the choke lever (5) to g if the engine is cold e for warm start - also use this posi- tion if the engine has been running but is still cold. 0023BA008 KN N Press the manual fuel pump bulb at least five times - even if the bulb is filled with fuel. Cranking N Place the unit on the ground. N Remove the blade scabbard. Check that the cutting blades are not touching the ground or any other obstacles. N Make sure you have a safe and secure footing. N Hold the unit firmly with your left hand on the fan housing and press down. N Hold the starter grip with your right hand. 16 HS 82 R, HS 82 T