Stihl HT-KM Instruction Manual - Page 3
Contents - pole pruner replacement chain
View all Stihl HT-KM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
Original Instruction Manual Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled. Contents KombiSystem 2 Guide to Using this Manual 2 Safety Precautions and Working Techniques 3 Using the Unit 10 Approved KombiEngines 12 Assembling the Unit 12 Mounting the KombiTool 13 Cutting Attachment 14 Mounting the Bar and Chain 14 Tensioning the Chain 15 Checking Chain Tension 16 Chain Lubricant 16 Filling Chain Oil Tank 16 Checking Chain Lubrication 18 Fitting the Harness 19 Starting / Stopping the Engine 20 Operating Instructions 20 Storing the Machine 21 Taking Care of the Guide Bar 21 Checking and Replacing the Chain Sprocket 22 Maintaining and Sharpening the Saw Chain 23 Maintenance and Care 26 Main Parts 27 Specifications 28 Maintenance and Repairs 29 Disposal 29 Trademarks 29 English Allow only persons who fully understand the manuals of the KombiEngine and pole pruner KombiTool to operate this power tool combination. To receive maximum performance and satisfaction from your STIHL KombiTool, it is important that you read, understand and follow the safety precautions and the operating and maintenance instructions in chapter "Safety Precautions and Working Techniques" before using your KombiTool. For further information you can go to www.stihlusa.com. Contact your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in the two manuals. WARNING Because a KombiEngine equipped with a pole pruner KombiTool has a highspeed cutting attachment some special safety precautions must be observed to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. © ANDREAS STIHL AG & Co. KG, 2020 0458-473-8621-C. VA5.J20. 0000007126_006_GB HT-KM This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic systems. 1