Stihl MS 171 Product Instruction Manual - Page 46
Models with Easy2Start, Models with standard starter, Carefully, Replacing the starter rope, Models
View all Stihl MS 171 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
135BA036 KN English Models with Easy2Start The rewind spring may pop out and uncoil during this operation - take care to avoid the risk of injury. Models with Easy2Start 65 4 3 2 N Use circlip pliers to carefully remove the circlip (2). N Remove the washer (3), driver (4), spring housing (5) and washer (6). If suitable circlip pliers are not available, have the starter rope or rewind spring replaced by your servicing dealer. Models with standard starter 208BA012 KN 7 8 9 9 N Remove the spring clip (7). N Carefully remove the rope rotor with washer (8) and pawls (9). The rewind spring may pop out and uncoil during this operation - take care to avoid the risk of injury. Replacing the starter rope Models with ElastoStart 208BA017 KN a N Thread the new rope through the starter grip and tie a simple overhand knot. Dimension "a" should be about 0.16 in (4 mm) to 0.23 in (7 mm). N Pull the knot back into the grip. N Refit the cap in the grip. 11 12 7 8 9 N Remove the spring clip (7). N Carefully remove the rope rotor with washer (8) and pawl (9). 44 208BA013 KN 208BA014 KN 10 N Pry the cap (10) out of the grip. N Remove the remaining rope from the rotor and starter grip. Thread the end of the rope N through the top of the guide bushing (11) and rope rotor (12) and secure it with a simple overhand knot. N Go to "Installing the Rope Rotor". MS 171, MS 181, MS 181 C, MS 211, MS 211 C 108BA015 KN