Stihl MS 360 C Instruction Manual - Page 37

Information Before You Start, At temperatures below -10°C - ms 360 carburetor kit

Get Stihl MS 360 C PDF manuals and user guides View all Stihl MS 360 C manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

english / USA Information Before You Start Fit the carburetor box cover and secure it with the twist lock: Preheated air from around the cylinder is now drawn in along with cold air - this helps prevent carburetor icing. At temperatures below -10°C It is advisable to fit the intake air preheating kit* if you use your saw in extremely cold conditions (temperatures below -10°C, in powder or drifting snow). When fitted, the kit ensures that only heated air is drawn in from around the cylinder. It prevents air filter and carburetor icing. The shutter for carburetor preheating must be in the "winter" position when the intake air preheating kit is fitted. If your saw is very cold (frost or ice on machine), start the engine and keep it at a high idle speed (with chain brake disengaged) until it reaches normal operating temperature. The air filter may load up faster when you use intake air preheating - clean it more frequently. In the event of engine running problems, first check that conditions for use of intake air preheating still apply. STOP 0 4 3 2 1 144BA020 KN The four positions of the Master Control lever To start the engine, move the lever to the cold start position l (1) - do not use force. If the Master Control lever is in the run position (3): Press down the throttle trigger interlock and move the Master Control downward. * see "Guide to Using this Manual" 36 MS 360 C

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
36
english / USA
MS 360 C
Fit the carburetor box cover and secure
it with the twist lock:
Preheated air from around the cylinder is
now drawn in along with cold air
– this
helps prevent carburetor icing.
At temperatures below -10°C
It is advisable to fit the intake air
preheating kit* if you use your saw in
extremely cold conditions (temperatures
below -10°C, in powder or drifting snow).
When fitted, the kit ensures that only
heated air is drawn in from around the
cylinder. It prevents air filter and
carburetor icing.
The shutter for carburetor preheating
must be in the "winter" position when the
intake air preheating kit is fitted.
*
see "Guide to Using this Manual"
If your saw is very cold (frost or ice on
machine), start the engine and keep it at
a high idle speed (with chain brake
disengaged) until it reaches normal
operating temperature.
The air filter may load up faster when
you use intake air preheating – clean it
more frequently.
In the event of engine running problems,
first check that conditions for use of
intake air preheating still apply.
The four positions of the
Master Control lever
To start the engine, move the lever to the
cold start position
l
(1)
- do not use
force.
If the Master Control lever is in the run
position
(3)
: Press down the throttle
trigger interlock and move the Master
Control downward.
Information
Before You Start
4
1
2
3
STOP
0
144BA020 KN