Stihl MS 360 Instruction Manual - Page 32
Chain Lubricant, Filling Chain Oil Tank, Do not use waste oil.
View all Stihl MS 360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Chain Lubricant Filling Chain Oil Tank english For automatic and reliable lubrication of the chain and guide bar - use only an environmentally compatible quality chain and bar lubricant with non-fling additive or the rapidly biodegradable STIHL Bioplus is recommended. Biological chain oil must be resistant to aging (e.g. STIHL Bioplus) since it will otherwise quickly turn to resin. This results in hard deposits that are difficult to remove, especially in the area of the chain drive, clutch and chain. It may even cause the oil pump to seize. The service life of the chain and guide bar depends on the quality of the lubricant. It is therefore essential to use only a specially formulated chain lubricant. If special chain lubricant is not available, you may - in an emergency - use an HD single grade or multigrade engine oil with a viscosity that suits the prevailing outside temperature. Do not use waste oil. Medical studies have shown that renewed contact with waste oil can cause skin cancer. Moreover, waste is environmentally harmful. Waste oil does not have the necessary lubricating properties and is unsuitable for chain lubrication. : Thoroughly clean the oil filler cap and the area round it to ensure that no dirt falls into the tank. : Refill the chain oil tank every time you refuel. There must still be a small amount of oil in the oil tank when the fuel tank is empty. If the oil tank is still partly full, the reason may be a problem in the oil supply system: Check chain lubrication, clean the oilways, contact your STlHL dealer for assistance if necessary. 165BA002 KN MS 360 31