Stihl MS 360 Instruction Manual - Page 59
Specifications, Engine, Cutting Attachment
View all Stihl MS 360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
english Specifications Engine STIHL single cylinder two-stroke engine Displacement: 3.75 cu.in (61,5 cm3) Bore: 1.89 in (48 mm) Stroke: 1.34 in (34 mm) Idle speed: 2800 rpm Ignition System Type: Electronic magneto ignition Spark plug (suppressed): Bosch WSR 6 F, NGK BPMR 7 A, Champion RCJ 6 Y Electrode gap: 0.02 in (0,5 mm) Spark plug thread: M 14x1,25; 0.37 in (9,5 mm) long Rewind Starter Starter rope: 0.14 in (3,5mm)dia. x 37.8 in (960 mm) Carburetor All position diaphragm carburetor with integral fuel pump Fuel tank capacity 1.32 US pt (0,625 l) Chain lubrication Fully automatic, speed-controlled reciprocating oil pump. Additional manual oil flow control Oil tank capacity 0.68 US pt (0,32 l) Weight (without bar and chain) 12.6 lb (5,7 kg) Cutting Attachment Recommended cutting attachments for compliance with § 5.12 of ANSI Standard B 175.1-2000 (see page 14 of this Manual): STIHL reduced kickback bar (with green label) for 0.325" and 3/8" pitch: Rollomatic with sprocket nose 40, 45 or 50 cm (16, 18 or 20 in) STIHL low kickback chain1) (with green label) for 3/8" pitch: 8.25 mm (0.325") Rapid-Micro 2 (26 RM 2) 9.32 mm (3/8") Rapid-Micro 2 (33 RM 2, 36 RM 2) Chain sprocket: 8-tooth for 0.325" pitch spur sprocket 7-tooth for 3/8" pitch spur sprocket In order to comply with the kickback performance requirements of § 5.12 of ANSI Standard B 175.1-2000, do not use replacement saw chain unless it has been designated as meeting the ANSI § 5.12 requirements on this specific powerhead, or has been designated as "low kickback" saw chain1) in accordance with the ANSI B 175.1-2000 standard. Since new bar/chain combinations may be developed after publication of this Manual, ask your STIHL dealer for the latest STIHL recommendations. Other bars and chains available for this powerhead are: STIHL yellow-labeled bars: for 0.325" and 3/8" pitch: Rollomatic "S" with sprocket nose 40, 45 or 50 cm (16, 18 or 20 in) 60 cm (24 in) only 3/8" pitch Duromatic with stellite tipped nose 40, 45 or 50 cm (16, 18 or 20 in) 60 cm (24 in) only 3/8" pitch STIHL yellow -labeled chains: for 0.325" pitch Rapid-Micro (26 RM), Rapid-Super (26 RS) for 3/8" pitch: Rapid-Micro (33 RM, 36 RM), Rapid-Super (33 RS, 36 RS, 33 RSL). Rapid-Duro (33 RD) 1) See definition of "low kickback chain" on page 17. 1) See definition of "low kickback chain" on page 17. 58 MS 360