Stihl TS 800 Instruction Manual - Page 3

Contents English Original Instruction Manual Printed on chlorine-free paper Printing inks contain vegetable oils, paper can be recycled. Guide to Using this Manual 2 Trademarks Safety Precautions and Working Techniques 3 Sample Applications 19 Abrasive Cutting Wheels 26 Composite Cutting Wheels 26 Diamond Cutting Wheels 27 Assembling the Cast Arm and Guard 31 Tensioning the Ribbed V-belt 37 Mounting an Abrasive Cutting Wheel 38 Fuel 39 Fueling 40 Starting / Stopping the Engine 41 Air Filter System 43 Engine Management 44 Adjusting the Carburetor 44 Spark Arresting Screen in Muffler 46 Spark Plug 46 Replacing the V-belt 48 Cut-off Machine Cart 48 Storing the Machine 49 Maintenance and Care 50 Main Parts 52 Specifications 55 Maintenance and Repairs 56 Disposal 56 Limited Warranty 57 STIHL Incorporated Federal Emission Control Warranty Statement 57 59 Allow only persons who fully understand this manual to operate your cut-off machine. To receive maximum performance and satisfaction from your STIHL Cutquik cut-off machine, it is important that you read, understand and follow the safety precautions and the operating and maintenance instructions in the chapter "Safety Precautions and Working Techniques" before using it. For further information you can go to www.stihlusa.com Contact your STIHL dealer or the STIHL distributor for your area if you do not understand any of the instructions in this manual. WARNING Because this cut-off machine is a highspeed cutting tool, some special safety precautions must be observed to reduce the risk of personal injury. Careless or improper use may cause serious or even fatal injury. TS 700, TS 800 This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic systems. 1 © ANDREAS STIHL AG & Co. KG, 2019 0458-572-8621-D. VB9.M19. 0000006706_005_GB